Roche Accu-Chek Aviva Información técnica descargar pdf (Pagina 239)

237

Display Shows Possible Cause(s) Possible Solution(s)

E-54 Not Enough

Sample

j Not enough blood or control

solution was drawn into the

test strip for measurement or

was applied after the test has

started.

j Discard the test strip and repeat the test.

E-55 Code Key

Expired

j The code key is from an

expired lot of test strips.

j This message may appear when using a white

activation chip in the meter. It means the test strips

expire at the end of the current month. At the end of

the month, discard the white activation chip and

any remaining test strips. Insert a black activation

chip. Make sure the time and date in the meter are

correct. If you need a black activation chip, please

contact Roche.

E-56 Sample

Applied Early

j Blood or control solution was

applied to the test strip before

the Apply Sample screen

appeared on the display.

j Discard the test strip and repeat the test with a new

test strip.

E-57 Electronic

Error

j An electronic error has

occurred or, in rare cases, a

used test strip was removed

and reinserted.

j Turn o the meter and remove the batteries. Wait at

least 30 seconds prior to reinserting the batteries.

Turn on the meter and perform a blood glucose or

control test. If the problem persists, contact Roche.

50813_00048009694_D.indb 237 7/3/12 3:13 PM

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 281 282

Sin comentarios

Roche Accu-Chek Aviva Información técnica Pagina 239