Roche Accu-Chek Active Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
19
4
Testing blood glucose
Applying blood
With test strip in the meter
2
Apply the blood drop to the
centre of the green field and then
remove your finger from the test
strip.
As soon as the meter detects the
blood, you hear a beep.
The test starts. The flashing
hourglass symbol
indicates
that the test is in progress.
If the amount of blood you
applied is insucient, after a few
seconds an acoustic warning in
the form of 3 beeps sounds. You
can then apply an additional
blood drop.
Lance the side of a fingertip with
your lancing device.
Figure
A
shows the
recommended sites for obtaining
blood.
Encourage a blood drop to form
by gently massaging the finger
towards the fingertip (see
B
).
The test is over in approximately
5seconds. The test result
appears on the display and you
hear a beep. The meter
automatically saves the test
result.
You can now mark the test result,
set a test reminder or turn the
meter o.
mg/dL meter
mmol/L
meter
31
A
B
man_06658768001_01_EN.indb 19 04.04.2013 09:11:33
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 69 70

Comentarios a estos manuales

Sin comentarios